Cisco 8100 Series - Page 4

Connect Router to the Network 25
CHAPTER 4
Port Connection Guidelines 25
Transceiver and Cable Specifications 26
Connecting a Console to the Router 26
Connect the Management Interface 27
Install and Remove QSFP Transceiver Modules 28
Installing the Transceiver Module 28
Connect Interface Ports 30
Connect a Fiber-Optic Port to the Network 31
Disconnect Optical Ports from the Network 31
Maintain Transceivers and Optical Cables 31
Replace Chassis Components 33
CHAPTER 5
Replace Fan Modules for Cisco 8100 Series Routers 33
Replace Power Supply 35
LEDs 37
CHAPTER 6
Chassis LEDs 37
Fan Tray LED 38
Power Supply LEDs 39
Port Status LEDs 41
Hardware Installation Guide for Cisco 8100 Series Routers
iv
Contents