Figure 3: Plug Power Cord Connector into AC-in Receptacle
Power cord, plugged into the AC-in receptacle1
Step 6 Strap in the power cord retainer, to hold it in place and avoid accidental removal. For more information, see
Power Cord Retainer Mechanism
Step 7 Set the power switch to the on (|) position
Power Cord Retainer Mechanism
This section shows how to correctly operate the power cord retainer, to tighten or loosen it while installing
or removing the power supply unit.
Some of the illustrations do not include the power supply module, for the sake of clarity. The retainer is
otherwise permanently fixed to the power supply module.
Note
Powering on the Router
7
Powering on the Router
Power Cord Retainer Mechanism
To Next Page
Loading...
