4
Installing Memory and Power Over Ethernet in Cisco 880 Series and Cisco 890 Series Integrated Services Routers
OL-16194-01
Installing Main Memory
Figure 2 Removing a DIMM
Step 4
Align the DIMM to the DIMM socket and insert the DIMM into the DIMM socket at a 45-degree angle,
as shown in Figure 3.
Figure 3 Installing a DIMM
Step 5
Gently push the DIMM down toward the system board, as shown in Figure 3, until it snaps into the
spring-loaded clips.
Step 6 Close the chassis according to the instructions in “Closing the Chassis” section on page 10.
1 Spring-loaded clips 3 DIMM socket
2 DIMM
103155
1
2
3
1 DIMM 3 Spring-loaded clips
2 DIMM socket
2
3
103154
1
To Next Page
Loading...
