© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 23
Feature Description
●
1024 MB on Cisco 880 Series WLAN
Default and maximum flash memory
●
128 MB on Cisco 880 Series data, embedded 3G WWAN, and Cisco Unified Border Element
models
●
256 MB on Cisco 880 Series Voice and SRST models
WAN
●
Fast Ethernet
●
Multimode VDSL2 and ADSl2/2+ over ISDN with ISDN backup
●
Multimode VDSL2 and ADSl2/2+ over basic telephone service
●
ADSL2/2+ over ISDN with ISDN backup
●
ADSL2/2+ over basic telephone service with ISDN backup
●
VDSL2 over basic telephone service with ISDN backup
●
Multimode G.SHDSL (2- and 4-wire support) with ISDN backup
●
Fast Ethernet and 3G WAN for Code Division Multiple Access (CDMA) and high-speed downlink
packet access (HSDPA)
LAN switch Managed 4-port 10/100BASE-T with autosensing MDI/MDX for auto crossover
Standard 802.11g/n access point based
on IEEE 802.11n draft 2.0 standard
Optional on all models
Console or auxiliary port RJ-45
One USB 1.1 port for advanced
security features such as security
tokens or USB flash memory
●
One USB 1.1 port on Cisco 880 Series Routers
●
USB devices supported:
◦
USB eTokens
◦
USB flash memory
Note: The USB 1.1 port cannot be used for connecting external devices other than those specified at:
http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.ht
ml.
ISDN BRI S/T Available on:
●
Cisco 886, 886VA, 887, 887V, 888, and 888EA for out-of-band management and dial backup or
primary
3G express card modem Available on:
●
Cisco 881G, 886G, 887G, 887VG, and 888G for out-of-band management and backup or primary
●
Cisco 888G for out-of-band management and backup or primary
Note: Cisco 887VG currently ships with HSPA modem only.
External power supply Universal 100 to 240 VAC input; 60W, 12 VDC output
Physical dimensions and weight Product dimensions, nonwireless models (H x W x D):
●
1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet)
●
1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm) (without rubber feet)
Product dimensions, wireless models (H x W x D):
●
1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet)
●
1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas)
●
Weight: 5.5 lb (2.5 kg) maximum
Power Product power specifications:
●
AC input voltage: 100 to 240 VAC
●
Frequency: 50 to 60 Hz
●
Maximum output power: 60W
●
Output voltages: 12 VDC
Optional internal PoE with external adapter:
●
Maximum output power: 80W
●
External output voltage: 48 VDC
Approvals and compliance Emissions:
●
47 CFR Part 15: 2006
●
CISPR22: 2005
●
EN300386: V1.3.3: 2005
●
EN55022: 2006
●
EN61000-3-2: 2000 [Inc amd 1 and 2]
●
EN61000-3-3: 1995 [+ amd 1: 2001]
To Next Page
