EasyManua.ls Logo

Cisco 881 - Page 9

Cisco 881
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 23
Feature Description
QoS features
Low-Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS) (on Fast Ethernet WAN ports and DSL ports in Packet
Transport Mode [PTM] only)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of service (CoS)-to-differentiated services code point (DSCP) mapping
Management features
Cisco Configuration Professional
Cisco Configuration Express
Cisco Configuration Engine support
Cisco AutoInstall
IP service-level agreement (SLA)
Cisco IOS Embedded Event Manager (EEM)
CiscoWorks
Cisco Security Manager
Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol,
CLI, and HTTP management
RADIUS and TACACS+
Out-of-band management with ISDN S/T port or external modem through virtual auxiliary port
Cisco WCS for management of unified access points in models supporting WLAN
High-availability features
Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
Hot Standby Router Protocol (HSRP)
Multigroup HSRP (MHSRP)
Dial backup with external modem through virtual auxiliary port
Dial backup with ISDN S/T port (select DSL models only)
3G backup (3G models only)
Number of recommended users 20
Table 6. Cisco IOS Software Features on Cisco 880 Series: WLAN Features (Available with Wireless Option)
Feature Description
WLAN hardware
IEEE 802.11n draft 2.0 standards-based access point with 802.11 b/g compatibility
Automatic rate selection for 802.11g/n
Captive omnidirectional 2-dBi gain dipole antennas
2 x 3 MIMO radio operation
Removable antennas on Cisco 881W models
Wi-Fi 802.11n Draft v2.0 certified
WLAN software features
Autonomous or unified access point
Cisco WCS support for monitoring of autonomous-mode access points
Option to maximize throughput or maximize range
Software-configurable transmit power
Radio roles, including access point, root bridge, nonroot bridge, and workgroup bridge
Wi-Fi Multimedia (WMM) certification
Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is maintained
Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency

Related product manuals