EasyManuals Logo

Cisco ASA 5506-X Mount And Connect

Cisco ASA 5506-X
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Wall Mount the ASA
Follow these steps to mount your ASA on a wall. You can purchase a wall mount kit. The part number for
the wall mount kit is ASA5506-WALL-MNT= .
Step 1 Choose a location on the desired wall for the ASA.
Step 2 Use the two Cisco-provided screws and anchors from the optional wall-mount kit.
If you are mounting the ASA onto something other than drywall, such as wood or sheet metal, anchors may not be
required.
Step 3 Use a pencil, ruler, and level to mark locations for the two mounting screws.
The width and length of the ASA are 7.87 x 9.23 inches ( 20 x 23.44 cm). The mounting holes in the chassis are in the
middle length-wise (that is, 6.372 inches from front and back), while the holes are inset from the opposite edges 0.75
inches (1.9 cm).
Thus, you need to make two level marks 6.37, or approximately 6-3/8, inches (16.18 cm) apart.
Figure 1: Marking the Locations of the Two Mounting Screws
Step 4 Drill a hole into the wall at each mark.
These holes should be slightly smaller in diameter than your anchors. The recommended drill hole size is 3/16".
Step 5 Insert the anchors into the holes and be sure they are properly seated.
Step 6 Fasten each screw into its anchor until it protrudes about 1/4 inch.
Step 7 Pick up the ASA, align the screws in the anchors with the holes in the bottom of the chassis, move the ASA toward the
wall until the screw heads are in the chassis, and then slide the ASA down until it rests on the screws.
Mount and Connect
2
Mount and Connect
Wall Mount the ASA

Other manuals for Cisco ASA 5506-X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASA 5506-X and is the answer not in the manual?

Cisco ASA 5506-X Specifications

General IconGeneral
ModelASA 5506-X
Firewall Throughput750 Mbps
Maximum Firewall Connections50, 000
Maximum VPN Peers50
Integrated Ports8 x 1 GE
Stateful Inspection Throughput750 Mbps
Weight4.4 lb (2 kg)
Firewall Throughput (Multiprotocol)750 Mbps
Firewall Throughput (Application Visibility and Control AVC)250 Mbps
Concurrent Sessions50, 000
New Connections per Second10, 000
IPsec VPN Throughput100 Mbps
Interfaces8 x 1 GE
Memory4 GB
Flash Memory8 GB
Form FactorDesktop
VPN Throughput100 Mbps
Maximum Concurrent Sessions50, 000
New Sessions per Second10, 000
Operating Temperature32 to 104°F (0 to 40°C)
Storage Temperature-13 to 158°F (-25 to 70°C)
Power SupplyExternal
Humidity10% to 90% non-condensing

Related product manuals