Cisco ASA 5506-X User Manual

Cisco Firepower Threat Defense for the ASA 5506-X Series Using Firepower Device Manager Quick Start Guide
7. Configure the Wireless Access Point (ASA 5506W-X)
12
After issuing the enable command, the system will prompt you for a password. By default, the password is
blank.
Example:
firepower> enable
Password: <by default, the password is blank>
firepower#
3. Enter the command to restore the access point default configuration:
firepower# hw-module module wlan recover configuration
4. See the Cisco IOS Configuration Guide for Autonomous Aironet Access Points for information about the
access point CLI.
Access the Wireless Access Point Console (ASA 5506W-X)
You can configure and monitor the wireless access point using the command-line interface (CLI), which you
access from the Firepower Threat Defense CLI (connect to the console port, or configure Telnet or SSH access).
Procedure
1. From the Firepower Threat Defense CLI, navigate to the system support CLI menu:
> system support diagnostic-cli
Example:
> system support diagnostic-cli
Attaching to ASA console ... Press 'Ctrl+a then d' to detach.
Type help or '?' for a list of available commands.
firepower>
2. Enter the enable command to turn on privileged commands:
firepower> enable
After issuing the enable command, the system will prompt you for a password. By default, the password is
blank.
Example:
firepower> enable
Password: <by default, the password is blank>
firepower#
3. Session to the access point:
firepower# session wlan console
Example:
firepower# session wlan console
opening console session with module wlan
connected to module wlan. Escape character sequence is ‘CTRL-^X’
ap>
4. See the Cisco IOS Configuration Guide for Autonomous Aironet Access Points for information about the
access point CLI.

Cisco ASA 5506-X Specifications

General

Model	ASA 5506-X
Firewall Throughput	750 Mbps
Maximum Firewall Connections	50, 000
Maximum VPN Peers	50
Integrated Ports	8 x 1 GE
Stateful Inspection Throughput	750 Mbps
Weight	4.4 lb (2 kg)
Firewall Throughput (Multiprotocol)	750 Mbps
Firewall Throughput (Application Visibility and Control AVC)	250 Mbps
Concurrent Sessions	50, 000
New Connections per Second	10, 000
IPsec VPN Throughput	100 Mbps
Interfaces	8 x 1 GE
Memory	4 GB
Flash Memory	8 GB
Form Factor	Desktop
VPN Throughput	100 Mbps
Maximum Concurrent Sessions	50, 000
New Sessions per Second	10, 000
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Power Supply	External
Humidity	10% to 90% non-condensing