Cisco ASA 5510 - Page 21

21
3.
Specify the type of traffic that you want to permit.
Note HTTP traffic is always directed from any TCP source port number toward a fixed
destination TCP port number 80.
a. Click TCP under Protocol and Service.
b. Under Source Port, choose “=” (equal to) from the Service drop-down menu.
c. Click the button labeled with ellipses (...), scroll through the options, and then choose Any.
d. Under Destination Port, choose “=” (equal to) from the Service drop-down menu.
e. Click the button labeled with ellipses (...), scroll through the options, and then select HTTP.