• scp://username@server/[path/]image_name
• sftp://username@server/[path/]image_name
• tftp://server[:port]/[path/]image_name
• usbA:/path/filename
Example:
firepower-2110 /firmware # download image
scp://admin@10.88.29.181/cisco-ftd-fp2k.6.3.0-1.SPA
Password:
Please use the command 'show download-task' or 'show download-task detail' to check
download progress.
c) Monitor the download process.
show download-task
Example:
firepower-2110 /firmware # show download
Download task:
File Name Protocol Server Port Userid State
--------- -------- --------------- ---------- --------------- -----
cisco-ftd-fp2k.6.4.0-1355.SSB
Scp 10.122.84.45 0 admin Downloading
firepower-2110 /firmware #
Step 4 When the new package finishes downloading (Downloaded state), boot the package.
a) View and copy the version number of the new package.
show package
Example:
firepower-2110 /firmware # show package
Name Package-Vers
--------------------------------------------- ------------
cisco-asa-fp2k.9.10.1.1.SPA 9.10.1.1
cisco-ftd-fp2k.6.3.0-1.SPA 6.3.0-1
firepower-2110 /firmware #
b) Install the package.
scope auto-install
install security-pack version version
In the show package output, copy the Package-Vers value for the security-pack version number. The
chassis installs the image and reboots. For FTD, this process, including reloading, can take approximately
30 minutes. For ASA, this process can take approximately 5 minutes.
Example:
firepower 2110 /firmware # scope auto-install
Cisco ASA and Firepower Threat Defense Reimage Guide
33
Cisco ASA and Firepower Threat Defense Reimage Guide
Reimage the Firepower 2100 to ASA or Firepower Threat Defense
To Next Page
Loading...
