Contents
xi
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Task Flow for Completing Interface Configuration 8-21
Configuring General Interface Parameters 8-22
PPPoE IP Address and Route Settings 8-25
Configuring Advanced Interface Parameters 8-26
Configuring IPv6 Addressing 8-27
Configuring the Link-Local Address on an Interface (Transparent Firewall Mode) 8-30
Allowing Same Security Level Communication 8-31
Enabling Jumbo Frame Support (ASA 5580, Multiple Mode) 8-32
Monitoring Interfaces 8-32
ARP Table 8-33
DHCP 8-33
DHCP Server Table 8-33
DHCP Client Lease Information 8-33
DHCP Statistics 8-35
MAC Address Table 8-35
Dynamic ACLs 8-36
Interface Graphs 8-36
Graph/Table 8-38
PPPoE Client 8-39
Interface Connection 8-39
Track Status for 8-39
Monitoring Statistics for 8-39
Feature History for Interfaces 8-40
CHAPTER
9 Configuring Basic Settings 9-1
Configuring the Hostname, Domain Name, and Passwords 9-1
Setting the Date and Time 9-2
Setting the Date and Time Using an NTP Server 9-3
Add/Edit NTP Server Configuration 9-3
Setting the Date and Time Manually 9-5
Configuring HTTP Redirect 9-5
Edit HTTP/HTTPS Settings 9-6
Configuring the Master Passphrase 9-6
Information About the Master Passphrase 9-6
Licensing Requirements for the Master Passphrase 9-7
Guidelines and Limitations 9-7
Adding or Changing the Master Passphrase 9-7
Disabling the Master Passphrase 9-8
Recovering the Master Passphrase 9-9
To Next Page
Loading...
