Cisco ASA 5540

7-2
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 7 Using the Startup Wizard
Prerequisites for the Startup Wizard
Prerequisites for the Startup Wizard
To complete the Startup Wizard, make sure that you have the following information available:
• The hostname
• The domain name
• A password to restrict administrative access through ASDM or the CLI
• The IP address information of the outside interface
• Other interfaces, such as the inside or DMZ interfaces
• NAT or PAT rules
• DHCP settings for the inside interface, for use with a DHCP server
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
Supported in single and multiple context modes, as noted in Table 7-1.
Firewall Mode Guidelines
Supported in routed and transparent firewall modes, as noted in Table 7-1.
Failover Guidelines
Supports sessions in Stateful Failover.
IPv6 Guidelines
Supports IPv6.
Model Guidelines
Supports all models.
Additional Guidelines
Supports the AIP SSM/SSC for IPS.