B-40
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Appendix B Configuring an External Server for Authorization and Authentication
Configuring an External TACACS+ Server
elapsed_time Defines the elapsed time in seconds for the connection (stop records only).
foreign_ip Specifies the IP address of the client for tunnel connections. Defines the address
on the lowest security interface for cut-through-proxy connections.
local_ip Specifies the IP address that the client connected to for tunnel connections. Defines
the address on the highest security interface for cut-through-proxy connections.
NAS port Contains a session ID for the connection.
packs_in Specifies the number of input packets transferred during this connection.
packs_out Specifies the number of output packets transferred during this connection.
priv-level Set to the user’s privilege level for command accounting requests or to 1 otherwise.
rem_iddr Indicates the IP address of the client.
service Specifies the service used. Always set to “shell” for command accounting only.
task_id Specifies a unique task ID for the accounting transaction.
username Indicates the name of the user.
Table B-10 Supported TACACS+ Accounting Attributes (continued)
Attribute Description
To Next Page
Loading...
