27-17
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 27 Configuring Network Object NAT
Configuration Examples for Network Object NAT
Figure 27-27 Bidirectional Rules in the NAT Rules Table
Configuration Examples for Network Object NAT
This section includes the following configuration examples:
• Providing Access to an Inside Web Server (Static NAT), page 27-18
• NAT for Inside Hosts (Dynamic NAT) and NAT for an Outside Web Server (Static NAT), page 27-20
• Inside Load Balancer with Multiple Mapped Addresses (Static NAT, One-to-Many), page 27-25
• Single Address for FTP, HTTP, and SMTP (Static NAT with Port Translation), page 27-29
• DNS Server on Mapped Interface, Web Server on Real Interface (Static NAT with DNS
Modification), page 27-32
• DNS Server and Web Server on Mapped Interface, Web Server is Translated (Static NAT with DNS
Modification), page 27-35
To Next Page
Loading...
