Cisco ASA 5540 User Manual

1-11
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Information About SNMP
Supported Tables in MIBs
Table 1-4 lists the supported tables and objects for the specified MIBs.
CPU temperature sensor for ASA 5585 SSP-60 cevSensorASA5585SSp60CPUTemp (cevSensor 83)
CPU temperature sensor for ASA 5585 SSP-60 No
Payload Encryption
cevSensorASA5585SSp60K7CPUTemp (cevSensor 84)
Table 1-3 SNMP Physical Vendor Type Values (continued)
Table 1-4 Supported Tables and Objects in MIBs
MIB Name Supported Tables and Objects
CISCO-ENHANCED-MEMPOOL-MIB cempMemPoolTable, cempMemPoolIndex, cempMemPoolType,
cempMemPoolName, cempMemPoolAlternate, cempMemPoolValid,
cempMemPoolUsed, cempMemPoolFree, cempMemPoolUsedOvrflw,
cempMemPoolHCUsed, cempMemPoolFreeOvrflw,
cempMemPoolHCFree
CISCO-ENTITY-SENSOR-EXT-MIB
Note Not supported on the
ASA Services Module.
ceSensorExtThresholdTable
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB ciscoL4L7ResourceLimitTable
CISCO-TRUSTSEC-SXP-MIB ctsxSxpGlobalObjects, ctsxSxpConnectionObjects, ctsxSxpSgtObjects
DISMAN-EVENT-MIB mteTriggerTable, mteTriggerThresholdTable, mteObjectsTable,
mteEventTable, mteEventNotificationTable
DISMAN-EXPRESSION-MIB
Note Not supported on the
ASA Services Module.
expExpressionTable, expObjectTable, expValueTable
ENTITY-SENSOR-MIB
Note Not supported on the
ASA Services Module.
entPhySensorTable
NAT-MIB natAddrMapTable, natAddrMapIndex, natAddrMapName,
natAddrMapGlobalAddrType, natAddrMapGlobalAddrFrom,
natAddrMapGlobalAddrTo, natAddrMapGlobalPortFrom,
natAddrMapGlobalPortTo, natAddrMapProtocol,
natAddrMapAddrUsed, natAddrMapRowStatus

Cisco ASA 5540 Specifications

General

Firewall Throughput	650 Mbps
Maximum Firewall Connections	400, 000
VPN Throughput	225 Mbps
Maximum VPN Peers	5, 000
High Availability	Active/Active, Active/Standby
IPSec VPN Throughput	225 Mbps
Memory	1 GB
IPS Throughput	225 Mbps
Security Contexts	50
Flash Memory	64 MB
Form Factor	1U
Power Supply	Dual
Interfaces	4 x 10/100/1000 Ethernet