EasyManua.ls Logo

Cisco C1100TG-1N24P32A User Manual

Cisco C1100TG-1N24P32A
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
First Published: 2020-05-25
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco C1100TG-1N24P32A and is the answer not in the manual?

Cisco C1100TG-1N24P32A Specifications

General IconGeneral
Device TypeGateway
Power over EthernetYes
Operating Temperature32 to 104°F (0 to 40°C)
Ports24
Uplink Ports2
Power SupplyAC

Summary

About Cisco 1100 Terminal Gateway Routers

Power Supply

Product power specifications for AC and DC input, and external power supply options.

Slots and Interfaces

Details on slots and interfaces available on the Cisco 1100 Terminal Gateway Routers.

Prepare for Router Installation

Safety Recommendations

General safety recommendations and warnings for installing the router.

Safety With Electricity

Precautions and warnings related to electrical safety during installation.

Prevent Electrostatic Discharge Damage

Procedures to prevent damage from electrostatic discharge (ESD) during installation.

Required Tools and Equipment for Installation and Maintenance

List of tools and equipment needed for router installation and maintenance.

Install and Connect the Router

Rack Mount the Chassis

Steps for mounting the router chassis in a 19-inch or 23-inch rack.

Attach Bracket to the Chassis

Instructions for attaching mounting brackets to the router chassis for rack installation.

Mount the Router on the Rack

Steps for physically mounting the router onto the rack after bracket attachment.

Chassis Grounding

Procedures for connecting the router chassis to earth ground for safety.

Connect Power Cable

Steps for connecting the AC or DC power cable to the router.

Connect WAN and LAN Interfaces

Instructions for connecting WAN and LAN interface cables to the router.

Related product manuals