To Next PageTo Next PageWhat to do if Cisco VG310 power LED and fans are off?
If the power LED and fans are off, the cause may be a power source switched off. Power on the chassis. It can also be a faulty power cable, so check and replace the power cable, if required. Another reason may be a faulty power source; check and correct the input power, if required.
Why does my Cisco VG310 unit shut off after operating for some time?
If the unit shuts off after operating for some time, overheating may be the cause. Check the ventilation of the chassis.
What to do if console screen display freezes on Cisco Gateway?
If the console screen display freezes, it may be due to a console fault. Try resetting or replacing the console. It could also be a software error, in which case, repeat the power-on procedure.
General| Number of Ports | 24 FXS ports |
|---|---|
| Network Protocols | SIP, MGCP, H.323 |
| Form Factor | Rack-mountable |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 149°F (-20 to 65°C) |
| Power Supply | AC 100 to 240 VAC, 50 to 60 Hz |
| Ethernet Ports | 2 x 10/100/1000 Ethernet ports |
| Humidity | 10 to 90% non-condensing |
| Compliance | FCC, CE, UL |
