To Next PageTo Next PageWhy does my Cisco VG350 unit shut off after operating for some time?
If your Cisco Gateway unit shuts off after operating for some time, it might be overheating. Make sure to check the ventilation around the unit.
How to troubleshoot a Cisco Gateway when the power LED and fan are off?
If the power LED and fan are off on your Cisco Gateway, first ensure that the power source is switched on. If it is on, check the power cable for any faults and replace if necessary. Also, verify the input power to ensure it is correct.
What to do if the console screen display freezes on a Cisco Gateway?
If the console screen display freezes on your Cisco Gateway, try resetting or replacing the console. If the issue persists, repeat the power-on procedure to address potential software errors.
Covers site selection, mounting options, and environmental considerations.
Details requirements for proper cooling and temperature for the VG350.
Provides essential safety guidelines and best practices for installation.
Specific guidelines for safe electrical work around the equipment.
General safety measures for personnel and equipment protection.
Procedures to prevent damage from ESD.
Pre-power-on checks to ensure the gateway meets installation requirements.
Step-by-step instructions for powering on and initializing the VG350.
Describes common problems and corrective actions for the VG350.
General
