EasyManua.ls Logo

Cisco VG200 - User Manual

Cisco VG200
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CHAPTER
50-1
Cisco Unified Communications Manager Bulk Administration Guide
OL-24965-01
50
Inserting Gateways
Use the following topics to insert gateways into Cisco Unified Communications Manager database:
• Creating CSV Data Files for Cisco VG200 Gateways, page 50-1
• Creating CSV Data Files for Cisco VG224 Gateways, page 50-4
• Creating the CSV Data File for Cisco Catalyst 6000 (FXS) Ports, page 50-3
• Creating CSV Data Files for Cisco VG202 and VG204 Gateways, page 50-6
• Inserting Gateways to Cisco Unified Communications Manager, page 50-8
Creating CSV Data Files for Cisco VG200 Gateways
You can use the BAT spreadsheet to create a CSV data file for VG200 gateways and ports. See the
following section:
• Using the BAT Spreadsheet for CSV Data Files for Cisco VG200 T1 CAS, T1 PRI, E1 PRI, FXS,
or FXO Gateways and Ports, page 50-1
You can use a text editor to create a text file in CSV format for VG200 gateways and ports. See the
following section:
• Creating a Text-Based CSV File for Cisco VG200 Gateways, page A-14
Using the BAT Spreadsheet for CSV Data Files for Cisco VG200 T1 CAS, T1 PRI,
E1 PRI, FXS, or FXO Gateways and Ports
Use the BAT spreadsheet to create the CSV data file that contains the details, such as domain name,
MGCP description, and port identifier, for individual T1 CAS, T1 PRI, E1 PRI, FXS or FXO ports.
For information about installing and using the BAT spreadsheet, see the “Using the BAT Spreadsheet for
Gathering Data” section on page 1-8.
To create a text-based CSV data file for VG200 gateways, see the “T1 CAS, T1 PRI, or E1 PRI Trunks
File Format” section on page A-16 for information and examples.
To create a text-based CSV data file for VG200 gateways, see the “FXO or FXS Trunks CSV File
Format” section on page A-15 for information and examples.

Questions and Answers

  • S
    Shawn MunozAug 12, 2025
    What to do if OK LED is off on Cisco VG200 Gateway?
    • C
      Christopher MartinezAug 12, 2025
      If the OK LED on your Cisco Gateway is off, it could be due to several reasons. First, examine the DC cable and replace it if necessary. Then, check the DC power supply, ensuring it's plugged in correctly, and replace it if faulty. Also, verify that the AC cable is properly connected. Finally, check the input power source and correct it if needed. If none of these steps resolve the issue, it might be due to a faulty internal power supply, and you should contact Cisco or your Cisco reseller.
  • S
    Scott VasquezAug 20, 2025
    Why does Cisco Gateway unit shuts off after operating for some time?
    • V
      vickimoralesAug 20, 2025
      If your Cisco Gateway unit shuts off after operating for some time, overheating could be the problem. Check the ventilation around the unit to ensure it is properly ventilated. If the issue persists, it could be a faulty voice gateway, in which case you should contact Cisco or your Cisco reseller.
  • A
    Ashley HudsonAug 31, 2025
    What to do if console screen display freezes on Cisco VG200 Gateway?
    • A
      andrew52Aug 31, 2025
      If the console screen display freezes on your Cisco Gateway, the cause might be a console fault. Try resetting or replacing the console. Alternatively, it could be a software error; in this case, repeat the power-on procedure. If the problem continues, it may indicate a faulty voice gateway, and you should contact Cisco or your Cisco reseller.

Cisco VG200 Specifications

General IconGeneral
ModelCisco VG200
Ethernet Ports1
Operating Temperature32 to 104°F (0 to 40°C)
Voice Ports2 FXS
Network InterfaceEthernet
Protocols SupportedSIP
Power SupplyExternal power adapter
Humidity10% to 90% non-condensing

Related product manuals