Need help?Do you have a question about the Cisco VG400 and is the answer not in the manual?
General| Product Type | Analog Voice Gateway |
|---|---|
| Protocols | SIP, MGCP, H.323 |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Voice Ports | 8 FXS ports |
| Security | TLS, SRTP, HTTPS |
| Power Supply | External AC power adapter |
| Mounting | Desktop or wall-mountable |
| Storage Temperature | -4 to 149°F (-20 to 65°C) |
| Compliance | FCC, CE |
| Network Interfaces | 2 x 10/100/1000 Ethernet ports |
Learn essential Cisco IOS software concepts for router configuration, saving time during initial setup and operations.
Utilize question mark (?) and arrow keys to find available commands and command variables for efficient CLI usage.
Understand different Cisco IOS command modes (User EXEC, Privileged EXEC, Global Configuration, Interface Configuration) and their prompts.
Learn to save running configuration to NVRAM using the 'copy running-config startup-config' command to prevent data loss.
Set an encrypted password and configure a hostname for your Cisco VG400 to distinguish it and prevent unauthorized changes.
Verify the configured host name and encrypted password using 'show config' command and re-entering privileged EXEC mode.
Learn to configure Gigabit Ethernet interfaces, including enabling the interface and specifying IP routing via CLI.
Establish a working IP network before configuring voice ports on the Cisco VG400.
Learn to configure analog FXS voice ports, including loop-length, ren, dc-offset, and cm-current-enhance commands.
Utilize optional bulk-configuration mechanisms for voice-port and voice dial peer configuration to save time.
To Next Page
