Cisco VG202XM

Other manuals for Cisco VG202XM

Questions and Answers:

Y
Yesenia FlemingAug 9, 2025
What to do if OK LED is off on Cisco VG202XM Gateway?
- C
  Crystal BarnesAug 9, 2025
  If the OK LED on your Cisco Gateway is off, it could be due to several reasons. First, examine the DC cable and replace it if necessary. Then, check the DC power supply, ensuring it's plugged in correctly, and replace it if faulty. Also, verify that the AC cable is properly connected. Finally, check the input power source and correct it if needed. If none of these steps resolve the issue, it might be due to a faulty internal power supply, and you should contact Cisco or your Cisco reseller.
J
James ClayAug 18, 2025
Why does Cisco Gateway unit shuts off after operating for some time?
- T
  Terry ScottAug 19, 2025
  If your Cisco Gateway unit shuts off after operating for some time, overheating could be the problem. Check the ventilation around the unit to ensure it is properly ventilated. If the issue persists, it could be a faulty voice gateway, in which case you should contact Cisco or your Cisco reseller.
A
Ana BallardAug 29, 2025
What to do if console screen display freezes on Cisco VG202XM Gateway?
- R
  ramirezhunterAug 29, 2025
  If the console screen display freezes on your Cisco Gateway, the cause might be a console fault. Try resetting or replacing the console. Alternatively, it could be a software error; in this case, repeat the power-on procedure. If the problem continues, it may indicate a faulty voice gateway, and you should contact Cisco or your Cisco reseller.