Do you have a question about the Cisco C9300L-24P-4X and is the answer not in the manual?
Model | C9300L-24P-4X |
---|---|
Device Type | Switch |
Form Factor | Rack-mountable |
Enclosure Type | 1U |
Subtype | Gigabit Ethernet |
Power Over Ethernet (PoE) | Yes |
PoE Budget | 370W |
Switching Capacity | 128 Gbps |
Forwarding Rate | 95.23 Mpps |
RAM | 4 GB |
Flash Memory | 16 GB |
Power Device | Internal power supply |
Installed Qty | 1 |
Power Redundancy | Optional |
Width | 17.5 in |
Operating System | Cisco IOS XE |
Ports | 24 x 10/100/1000 PoE+ ports, 4 x 10 Gigabit SFP+ uplinks |
MAC Address Table Size | 32000 entries |
Routing Protocol | OSPF, BGP, EIGRP, RIP |
Remote Management Protocol | SNMP, SSH, Telnet |
Features | VLAN support, DHCP snooping, IPv6 support, Quality of Service (QoS) |
Compliant Standards | IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Memory | 4 GB RAM |
Operating Temperature | 32 to 104 °F |
Operating Humidity | 10% to 90% (non-condensing) |
Stacking | Up to 8 switches |