To Next PageTo Next Page
Need help?Do you have a question about the Cisco C9300L-24T-4X and is the answer not in the manual?
General| Model | C9300L-24T-4X |
|---|---|
| Category | Switch |
| Ports | 24 |
| Uplink Ports | 4 |
| Switching Capacity | 128 Gbps |
| Stackable | Yes |
| DRAM | 4 GB |
| Flash Memory | 16 GB |
| Power Device | Internal power supply |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Management | CLI, SNMP, Web GUI |
| Input Voltage | 100-240 VAC |
| Operating Humidity | 10% to 85% non-condensing |
Provides essential safety precautions and warnings before installing the equipment.
Covers the physical installation process of the switch into a rack or other mounting.
Details the procedures for mounting the switch securely in a rack.
Details the procedure for installing a network module into the switch.
Guides on how to install SFP, SFP+, and QSFP+ transceiver modules.
Describes the different power supply modules supported by the switches.
Details the procedure for installing or replacing an AC power supply unit.
Explains the process for installing a DC power supply unit.
Provides the procedure for installing a fan module into the switch.
Details the steps for installing an SSD module into specific switch models.
