To Next PageTo Next Page
Need help?Do you have a question about the Cisco C9300L-48UXG-4X and is the answer not in the manual?
General| Model | C9300L-48UXG-4X |
|---|---|
| Total Ports | 52 |
| Uplink Ports | 4 x 10G SFP+ |
| Power over Ethernet | Yes |
| Stackable | Yes |
| Modularity | Fixed |
| Operating System | Cisco IOS XE |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Product Family | Catalyst 9300 Series |
| Form Factor | Rack-mountable |
| Security Features | MACsec |
| Power Supply | hot-swappable power supplies |
| Dimensions (H x W x D) | 1.75 x 17.5 x 15.5 in |
| Warranty | Limited lifetime warranty |
| UPOE+ Power | 60W per port (UPOE+), 384W total |
| Weight | 15.2 lb (6.9 kg) |
Details the different Cisco Catalyst 9300 Series switch models available.
Lists and describes the supported internal and external power supply modules.
Crucial safety precautions and warnings before installation and operation.
Essential environmental and physical site requirements for successful installation.
Crucial procedures for proper system grounding to ensure safety.
Procedures to prevent damage from electrostatic discharge to hardware.
Rules and guidelines for connecting switches in data and power stacks.
Procedures for physically installing the switch into its operating environment.
Steps for mounting the switch securely within a standard rack.
Step-by-step guide for installing a network module into the switch.
Detailed steps for installing or replacing an AC power supply module.
Detailed steps for installing a DC power supply module.
Crucial procedures for grounding the switch to ensure electrical safety.
Guidelines for safely installing or removing fan modules.
Step-by-step guide for installing a fan module into the switch.
Steps for installing an SSD module on specific switch models.
Steps for installing an SSD module on C9300LM series switches.
Instructions for initial switch setup and configuration via the Web UI.
Instructions for initial switch setup and configuration via the CLI.
