Cisco Catalyst 9120AX Series User Manual

20
Cisco Catalyst 9120AX Series Access Points
15 Related Documentation
All user documentation for the Cisco Catalyst 9120AX series access point is available at the following URL:
http://www.cisco.com/c/en/us/support/wireless/aironet-9120AX-series-access-points/tsd-products-support-series-
home.html
For detailed information and guidelines for configuring and deploying your access point in a wireless network, see the
following documentation:
 Cisco Wireless Controller Configuration Guide, Release 8.9, at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-9/config-guide/b_cg89.html
 Cisco Catalyst 9120AX Series Access Point Deployment Guide, at the following URL:
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/guide-c07-742311.
html
16 Declarations of Conformity and Regulatory Information
This section provides declarations of conformity and regulatory information for the Cisco Catalyst 9120AX Series Access
Points. You can find additional information at this URL:
www.cisco.com/go/aironet/compliance
Manufacturers Federal Communication Commission Declaration of Conformity
Statement
Manufacturer:
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Access Point Models Certification Number
C9120AXI-B LDKVCVER1937

Cisco Catalyst 9120AX Series Specifications

General

Frequency Bands	2.4 GHz and 5 GHz
Antenna Type	Internal Antennas
PoE	802.3at PoE+
Wi-Fi Standard	802.11ax
MIMO	4x4 MU-MIMO
Weight	1.2 kg
Form Factor	Ceiling mount
Ethernet Ports	1 x 10/100/1000/2500 Multigigabit Ethernet port (RJ-45)
Dimensions	8.7 x 8.7 x 2.2 in