Need help?Do you have a question about the Cisco Catalyst 9130AX Series and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Bluetooth | Bluetooth 5.0 |
| Target Wake Time (TWT) | Yes |
| BSS Coloring | Yes |
| USB Port | 1x USB 2.0 |
| Frequency Bands | 2.4 GHz, 5 GHz |
| PoE | 802.3at (PoE+) |
| Antenna Type | Internal |
| OFDMA | Yes |
| Mounting | Ceiling, Wall |
| Weight | 1.2 kg |
| Security | WPA3, WPA2, WPA, 802.1X |
| Management | Cisco DNA Center, Cisco Prime Infrastructure |
| MIMO | 8x8:8 MU-MIMO (5 GHz), 4x4:4 MU-MIMO (2.4 GHz) |
Overview of the Cisco Catalyst 9130AX Series Wireless Access Point, its features, and models.
Details the key features and capabilities of the C9130AX series access point.
Explains the different operating modes: Local, FlexConnect, Monitor, and Sniffer.
Describes internal and external antenna configurations for C9130AX series APs.
Outlines the sequence of operations for installing the access point.
Steps to connect and deploy the AP on the wireless network, checking the status LED.
How C9130AXE APs automatically detect and configure external antennas.
Instructions for using the mode button to reset or clear AP configurations.
Explanation of the IEEE 802.11ax standard, also known as Wi-Fi 6.
Details Self-Identifying Antennas and their automatic configuration capabilities.
Explains the FRA feature for dynamic radio assignment to serve more clients.
Describes the Smart Antenna connector on C9130AXE and antenna connection.
Discussion on compliance with human exposure standards for radio frequencies.
Confirmation of compliance with FCC guidelines for radio wave exposure.
Confirmation of compliance with Industry Canada guidelines for radio wave exposure.
Statement of compliance with Industry Canada RSS standards and operational conditions.
To Next Page