EasyManua.ls Logo

Cisco Catalyst Wireless 9164I Series - User Manual

Cisco Catalyst Wireless 9164I Series
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point Hardware
Installation Guide
First Published: 2022-08-26
Last Modified: 2022-08-26
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst Wireless 9164I Series and is the answer not in the manual?

Cisco Catalyst Wireless 9164I Series Specifications

General IconGeneral
BrandCisco
ModelCatalyst Wireless 9164I Series
CategoryWireless Access Point
LanguageEnglish

Summary

Preface

Document Overview and Resources

Covers guide contents, conventions, related documents, and support information.

About the Access Point

Introduction to Cisco Catalyst Wireless 9164 I Series Wi-Fi 6 E Access Point

Provides an overview of the AP's capabilities and supported platforms.

Cisco Catalyst Wireless 91641 Series Wi-Fi 6 E Access Point Features

Details the hardware and supporting features of the CW9164I AP.

AP Model Numbers and Regulatory Domains

Lists AP models and explains regulatory domain identification.

Antennas and Radios

Provides detailed information about the AP's antennas and radios.

Operating Frequency and Maximum Output Power

Details the operating frequencies and maximum output power levels.

Hardware Features

Access Point Views, Ports, and Connectors

Details the views, ports, and connectors available on the AP.

CW91641 (Internal Antenna) Radiation Patterns

Illustrates the radiation patterns for the CW9164I model's internal antennas.

Unpacking Your Access Point

Package Contents

Lists the items included in each AP package.

Unpacking the Access Point

Provides a step-by-step procedure for unpacking the AP.

Cisco Orderable Accessories

Lists optional accessories available for purchase from Cisco.

Installation Overview

Performing a Preinstallation Configuration (Optional)

Describes procedures to ensure successful AP installation and initial operation.

Preinstallation Checks and Installation Guidelines

Recommends site surveys and lists required information for installation.

Mounting the Access Point

Details the recommended places and methods for mounting the AP.

Powering the Access Point

Explains the supported PoE standards and DC power options for the AP.

Configuring and Deploying the Access Point

The Controller Discovery Process

Explains how the AP discovers and connects to a controller.

Deploying the Access Point on the Wireless Network

Outlines steps to deploy the AP after connecting and powering it up.

Checking the Access Point LEDs

Explains how to interpret AP status LED indicators.

Troubleshooting

Using the Mode Button

Details how to reset the AP or clear its internal storage using the mode button.

Troubleshooting the Access Point to Cisco Controller Join Process

Provides guidance on resolving issues with APs joining the controller.

Important Information for Controller-Based Deployments

Key guidelines for AP communication with Cisco wireless controllers.

Configuring DHCP Option 43

Explains how to use DHCP Option 43 for controller IP address discovery.

Safety Guidelines and Warnings

Safety Instructions

Provides critical safety instructions and warnings for installation and use.

Declarations of Conformity and Regulatory Information

Country-Specific Compliance Statements

Covers FCC, VCCI (Japan), Canada, EU, UK, Taiwan, and Brazil regulatory compliance.

RF Exposure Compliance and Guidelines

Details RF exposure limits, guidelines, and additional resources.

APPENDIX A

Transmit Power and Receive Sensitivity Values

Lists transmit power and receive sensitivity values for various Wi-Fi standards and MCS rates.

Related product manuals