CHAPTER 1
About the Access Point
• Introduction to Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point, on page 1
• Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point Features, on page 1
• AP Model Numbers and Regulatory Domains, on page 3
• Antennas and Radios, on page 4
Introduction to Cisco Catalyst Wireless 9164I Series Wi-Fi 6E
Access Point
The Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point is an enterprise-class tri-band (2.4 GHz, 5
GHz, 6 GHz) access point. The AP supports full interoperability with leading 802.11ax and 802.11ac clients
and a hybrid deployment with other APs and controllers.
The AP hardware is supported on the following platforms:
• Cisco DNA Center on-premises
• Cisco Catalyst stack
• Meraki cloud-based stack
A full listing of the AP's features and specifications is provided in the Cisco Catalyst Wireless 9164I Series
Wi-Fi 6E Access Point Data Sheet at:
Cisco Catalyst 9164 Series Access Points Data Sheet
Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point
Features
The CW9164I AP is a tri-band Wi-Fi 6E enterprise indoor access point designed to work with the Cisco 9800
wireless controller. The AP includes the following hardware and supporting features:
• Five radios:
• A 4x4:4 6-GHz radio
• A 4x4:4 5-GHz radio
Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point Hardware Installation Guide
1
To Next Page
Loading...
