Need help?Do you have a question about the Cisco Catalyst IW9165D and is the answer not in the manual?
General| Brand | Cisco |
|---|---|
| Model | Catalyst IW9165D |
| Category | Wireless Access Point |
| Language | English |
Overview of the Cisco Catalyst IW9165D Heavy Duty Access Point's purpose and design.
Details the key hardware features and specifications of the IW9165D access point.
Identifies and describes the various physical connectors and ports available on the access point.
Explains the connection and pinout for the 4-pin Micro-Fit connector used for DC power input.
Details the M12-RJ45 adapter for connecting Ethernet cables with M12 X-coded connectors.
Describes the M12-PWR adapter for connecting DC power using M12 A-coded connectors.
Lists the supported power sources for the IW9165D, including DC power and PoE options.
Details the Ethernet uplink port, its capabilities, and connection requirements for PoE.
Discusses the antenna configurations, including external N-type connectors and internal antennas.
Lists and describes the external antennas compatible with the IW9165D, including PID, gain, and connector type.
Provides diagrams and data illustrating the radiation patterns of the IW9165D's internal antennas.
Lists all items included in the IW9165D access point package.
Step-by-step instructions for safely unpacking the access point from its shipping box.
Information on accessories that can be ordered separately from Cisco for the access point.
Essential checks and site planning advice before installing the access point.
Instructions for physically mounting the access point, including orientation and kit options.
Guidelines for orienting the access point correctly during installation for optimal visibility and function.
Instructions for wall mounting the access point using the fixed mounting kit, including bracket details.
Instructions for pole mounting the access point using the tiltable mounting kit.
Guidance on installing a lightning arrestor for protection against overvoltage transients.
Important considerations and notes for installing the lightning arrestor correctly.
Procedures for properly grounding the access point for safety and performance.
Details on how to power the access point using DC power or PoE.
Steps for connecting the access point to a Cisco-approved power injector.
Step-by-step guide to connecting DC power via a cable gland.
Step-by-step guide to connecting DC power using an M12 adapter.
Steps for connecting the Ethernet cable using either a cable gland or an M12 adapter.
Step-by-step guide to connecting an Ethernet cable via an RJ-45 port using a cable gland.
Step-by-step guide to connecting an Ethernet cable via an RJ-45 port using an M12 adapter.
Explains how to interpret the status LED indicators on the access point.
Details the procedure for resetting the access point to factory defaults or clearing storage.
General safety instructions and warnings for handling and installing Cisco access points.
Information regarding FCC compliance for RF exposure and device operation.
General safety precautions to follow during installation and operation.
Specific safety measures to take when installing antennas to avoid hazards.
Recommendations to prevent damage to radios when testing in specific environments.
Guidance on conducting site surveys to optimize network performance and coverage.
FCC Declaration of Conformity statement for the access point models.
Regulatory information specific to operating Cisco Catalyst access points in Mexico.
VCCI Class A warning statement and operating guidelines for Japan.
Industry Canada compliance statement, including RF exposure limits.
CE marking and regulatory compliance information for EU and EFTA countries.
Compliance information specific to the United Kingdom.
Information regarding compliance with international RF exposure guidelines.
Link to find all Declaration of Conformity statements for the product.
To Next Page