Cisco Catalyst IW-6300H-AC K9 Series User Manual

1
Cisco Systems, Inc. www.cisco.com
Getting Started and Product Document of
Compliance for the Cisco Catalyst IW6300
Heavy Duty Series Access Points
Cisco Part Number 78-101483-01A0
First Published: November 2019
Last Updated: January 2020
 Introduction, page 2
 Items Shipped with your Device, page 2
 Optional Tools and Hardware, page 2
 Equipment that you supply, page 2
 Related Documentation, page 3
 Installation Warning and Caution Statements for Hazardous Locations Environments, page 4
 Additional Considerations Before Installation, page 6
 Grounding the Device, page 6
 Connecting AC Power to IW-6300H-AC-x–K9, page 8
 Connecting DC Power to IW-6300H-DCW-x–K9, page 9
 Connecting DC Power to IW-6300H-DC-x–K9, page 10
 Antennas, page 11
 Avoidance of Electrostatic Discharge, page 11
 Performing Maintenance, page 11
 Removing the Access Point from Service, page 11
 Hazardous Locations Standards and Marking Strings, page 12
 Safety and Compliance Specifications, page 14
 EMC Information, page 15
IMPORTANT! READ ALL THE SAFETY INFORMATION
B
EFORE INSTALLING THE HARDWARE

Cisco Catalyst IW-6300H-AC K9 Series Specifications

General

Model	IW-6300H-AC K9
Category	Wireless Access Point
Frequency Bands	2.4 GHz, 5 GHz
Antenna	Internal
Mounting Options	Wall Mount, Ceiling Mount
IP Rating	IP67
Indoor/Outdoor	Outdoor
Power over Ethernet (PoE)	802.3at (PoE+)
Security	WPA3
Form Factor	Compact
Weight	1.5 kg

Summary

Introduction to Cisco Catalyst IW6300 Series

Items Shipped with Device

Lists the components included in the access point package for verification upon unpacking.

Optional Tools and Hardware

Details optional tools and hardware that can be obtained from Cisco for installation.

Equipment You Supply for Installation

Specifies the tools and equipment the user needs to provide for installation.

Related Documentation Links

Provides links to online resources and documentation for the access point series.

Hazardous Location Installation Warnings

Additional Installation Considerations

Covers special considerations for preparing access points for Class I, Division 2/Zone 2 hazardous locations.

Device Grounding Procedure

Provides instructions and requirements for properly grounding the access point.

Connecting AC Power to IW-6300H-AC-x-K9

Connecting DC Power to IW-6300H-DCW-x-K9

Connecting DC Power to IW-6300H-DC-x-K9

Antennas and Maintenance Procedures

Electrostatic Discharge Avoidance

Guidance on preventing electrostatic discharge within hazardous locations during operation.

Performing Access Point Maintenance

Details on the minimal periodic or preventive maintenance required for the access point.

Removing Access Point from Service

Steps for safely disconnecting and removing the access point from its installation.

Conducting Periodic Inspections

Schedule and procedure for inspecting the access point for continued safe operation.

Hazardous Location Standards and Marking Strings

Safety and Compliance Specifications

EMC Information and Notices

FCC Class A Digital Device Notice

Details FCC Part 15 compliance for Class A digital devices and user responsibilities.

Industry Canada Compliance Statement

Covers Canadian compliance statements and licensing for the access point devices.

European and Regional Compliance

EU Declaration of Conformity

Details conformity to R&TTE Directive and Medical Devices Directive for EU countries.

Radio Frequency Exposure Guidelines

Information on compliance with international, FCC, and Industry Canada RF exposure guidelines.