Cisco Catalyst Wireless 9164I Series - Antennas and Radios; Operating Frequency and Maximum Output Power

wireless/wireless-compliance-tool/index.html. Not all regulatory domains have been approved. As and when
they are approved, this compliance list is updated.
The x in the model numbers represents the regulatory domain.
Note
Antennas and Radios
The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst Wireless 9164I AP (CW9164I-x) has the following list of internal antennas:
• Four internal dual-band antennas with a dedicated 2.4-GHz radio and a 5-GHz radio
• Four internal dual-band antennas with a dedicated 6-GHz radio
• Two tri-band antennas with a dedicated 2.4-GHz, 5-GHz, and 6-GHz Aux radio
• One internal single-band antenna with a dedicated 2.4-GHz IoT radio
Operating Frequency and Maximum Output Power
Table 1: Cisco CW9164I AP Values for European Union (CE) Region
Maximum Total EIRP Power Level
(dBm)
Frequency BandsRadio
20 (2x2)2400–2483.5 MHzWi-Fi
23 (4x4)5150–5250 MHz
23 (4x4)5250–5350 MHz
30 (4x4)5470–5725 MHz
23 (4x4)5945–6425 MHz
9.31
2400–2483.5 MHzBluetooth Low Energy (BLE)
Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point Hardware Installation Guide
4
About the Access Point
Antennas and Radios