Cisco Catalyst Wireless 9164I Series User Manual

Cisco Orderable Accessories
You can order the following accessories separately, from Cisco:
• AP-mounting brackets to mount the AP
DescriptionMounting Brackets
For low-profile non-pivoting installationsAIR-AP-BRACKET-1=
For electrical or network boxes above ceiling mountsAIR-AP-BRACKET-2=
Flush ceiling grid clipAIR-AP-T-RAIL-F=
Recessed ceiling grid clipAIR-AP-T-RAIL-R=
T-RAIL channel adapterAIR-CHNL-ADAPTER=
• Power injectors when Power over Ethernet (PoE) is not available
DescriptionPower Supply
Mid-span power injector AIR-PWRINJ7= when (PoE) is not available
Power specifications: 50W, 56VDC
For more information, see the power injector data sheet.
AIR-PWRINJ7=
A 802.3at power injector when PoE is not available
Power Specifications: 30W, 55VDC
For more information, see the power injector data sheet.
AIR-PWRINJ6=
Meraki 802.3bt PoE injector
Power Specifications: 60W, 55VDC
For more information, see the power injector data sheet.
MA-INJ-6-x
DC power adapter
Power Specifications: 50W, 54VDC
MA-PWR-50WAC
Cisco Catalyst Wireless 9164I Series Wi-Fi 6E Access Point Hardware Installation Guide
16
Unpacking Your Access Point
Cisco Orderable Accessories

Cisco Catalyst Wireless 9164I Series Specifications

General

Brand	Cisco
Model	Catalyst Wireless 9164I Series
Category	Wireless Access Point
Language	English