EasyManuals Logo

Cisco Catalyst 9120AX Series User Manual

Cisco Catalyst 9120AX Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
Cisco Catalyst 9120AX Series Access Points
Chinese Translation
English Translation
Low-power Radio-frequency Devices Technical Specifications
Operation of Cisco Catalyst Access Points in Brazil
This section contains special information for operation of Cisco Catalyst access points in Brazil.
Access Point Models:
C9120AXI-Z
4.7 Unlicensed National Information Infrastructure
4.7.5 Within the 5.25-5.35 GHz band, U-NII devices will be restricted to indoor operations to
reduce any potential for harmful interference to co-channel MSS operations.
4.7.6 The U-NII devices shall accept any interference from legal communications and shall not
interfere the legal communications. If interference is caused, the user must stop operating
the device immediately and can't re-operate it until the harmful interference is clear.
4.7.7 Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an
emission is maintained within the band of operation under all conditions of normal operation
as specified in the user manual.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 9120AX Series and is the answer not in the manual?

Cisco Catalyst 9120AX Series Specifications

General IconGeneral
Frequency Bands2.4 GHz and 5 GHz
Antenna TypeInternal Antennas
PoE802.3at PoE+
Wi-Fi Standard802.11ax
MIMO4x4 MU-MIMO
Weight1.2 kg
Form FactorCeiling mount
Ethernet Ports1 x 10/100/1000/2500 Multigigabit Ethernet port (RJ-45)
Dimensions8.7 x 8.7 x 2.2 in

Related product manuals