CHAPTER 7
Cisco Wi-Fi Interface Module (WIM)
This chapter contains the following sections:
• Overview, on page 57
• Installation, on page 59
• Transmit Power and Receive Sensitivity, on page 61
• Thermal Mitigation, on page 64
Overview
This overview describes the Cisco Wide Pluggable Form Factor WIFI6 AP Module for Industrial Routers.
The PID is WP-WIFI6-x.
The Cisco Wi-Fi Interface Module will be refered to as the WIM from this point forward.
Highlights of the WIM are:
• Pluggable 802.11ax module for IoT Routers
• WiFi-6 (802.11ax), 2x2 MIMO with 2 spatial streams
• Supports WGB Mode
• EWC Controller Support
• Field Replaceable Unit (FRU), however does not support OIR (Online Insertion and Removal)
• Versatile RF coverage with external RP-SMA antenna connectors
• Flexible Antenna Port feature support
The following graphic illustrates the front panel of the WIM.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
57
To Next Page
Loading...
