Cisco CIAC-GW-K9 - Package Contents; Physical Overview and Port Description

2-3
Cisco Physical Access Gateway User Guide
OL-32499-01
Chapter 2 Installing and Configuring the Cisco Physical Access Gateway
Package Contents
Package Contents
Each Cisco Physical Access Gateway includes the following:
• Six End-Of-Line (EOL) 1K termination resistors (used for supervised input interfaces)
• Two mounting brackets, with 4 screws for each bracket
• Regulatory compliance and safety information
• Quick Start guide
• Connector plugs, including the following:
Physical Overview and Port Description
Figure 2-2 and Figure 2-3 show the location of each port, including connections for power, Ethernet,
door readers and other input and output devices.
Figure 2-2 Cisco Physical Access Gateway Ports and Connectors: Side View
Type Quantity
10 Pin 1
3 Pin 4
2 Pin 6
1
2
2
3
6
5
9
10
7
8
4
187040