Implementing Secure Shell on Cisco IOS XR Software
Additional References
SC-209
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Additional References
The following sections provide references related to implementing secure shell.
Related Documents
Standards
MIBs
Related Topic Document Title
AAA commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
Authentication, Authorization, and Accounting Commands on
Cisco
IOS XR Software module in Cisco IOS XR System Security
Command Reference
AAA configuration tasks Configuring AAA Services on Cisco IOS XR Software module in
Cisco
IOS XR System Security Configuration Guide
Host services and applications commands: complete
command syntax, command modes, command history,
defaults, usage guidelines, and examples
Host Services and Applications Commands on Cisco IOS XR
Software module in Cisco
IOS XR IP Addresses and Services
Command Reference
IPSec commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
IPSec Network Security Commands on Cisco IOS XR Software
module in Cisco
IOS XR System Security Command Reference
SSH commands: complete command syntax, command
modes, command history, defaults, usage guidelines,
and examples
Secure Shell Commands on Cisco IOS XR Software module in
Cisco
IOS XR System Security Command Reference
Standards Title
Draft-ietf-secsh-userauth-17.txt SSH Authentication Protocol, July 2003
Draft-ietf-secsh-connect-17.txt SSH Connection Protocol, July 2003
Draft-ietf-secsh-architecture-14.txt SSH Protocol Architecture, July 2003
Draft-ietf-secsh-transport-16.txt SSH Transport Layer Protocol, July 2003
MIBs MIBs Link
— To locate and download MIBs using Cisco IOS XR software, use the
Cisco MIB Locator found at the following URL and choose a
platform under the Cisco Access Products menu:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To Next Page
Loading...
Need help?
General
