EasyManuals Logo
Home>Cisco>Network Router>CRS-1 - Carrier Routing System Router

Cisco CRS-1 - Carrier Routing System Router Configuration Guide

Cisco CRS-1 - Carrier Routing System Router
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Configuring AAA Services on Cisco IOS XR Software
How to Configure AAA Services
SC-34
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
7. Repeat Step 2. through Step 5. for each external server to be configured.
8. end
or
commit
9. show tacacs
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
tacacs-server host host-name port port-number
Example:
RP/0/RP0/CPU0:router(config)# tacacs-server
host 209.165.200.226 port 51
RP/0/RP0/CPU0:router(config-tacacs-host)#
Specifies a TACACS+ host server and optionally specifies a
server port number.
This option overrides the default, port 49. Valid port
numbers range from 1 to 65535.
Step 3
tacacs-server host host-name timeout seconds
Example:
RP/0/RP0/CPU0:router(config-tacacs-host)# tacac
s-server host 209.165.200.226 timeout 30
RP/0/RP0/CPU0:router(config)#
Specifies a TACACS+ host server and optionally specifies a
timeout value that sets the length of time the AAA server
will wait to receive a response from the TACACS+ server.
This option overrides the global timeout value set with
the tacacs-server timeout command for this server
only. The timeout value is expressed as an integer in
terms of timeout interval seconds. The valid timeout
range is from 1 to 1000 seconds.
Step 4
tacacs-server host host-name key [0 | 7]
auth-key
Example:
RP/0/RP0/CPU0:router(config)# tacacs-server
host 209.165.200.226 key 0 a_secret
Specifies a TACACS+ host server and optionally specifies
an authentication and encryption key shared between the
AAA server and the TACACS+ server.
The TACACS+ packets are encrypted using this key.
This key must match the key used by TACACS+
daemon. Specifying this key overrides the global key
set by the tacacs-server key command for this server
only.
(Optional) Entering 0 indicates that an unencrypted
(clear-text) key will follow.
(Optional) Entering 7 indicates that an encrypted key
will follow.
The auth-key argument specifies the encrypted or
unencrypted key to be shared between the AAA server
and the TACACS+ server.

Table of Contents

Other manuals for Cisco CRS-1 - Carrier Routing System Router

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CRS-1 - Carrier Routing System Router and is the answer not in the manual?

Cisco CRS-1 - Carrier Routing System Router Specifications

General IconGeneral
BrandCisco
ModelCRS-1 - Carrier Routing System Router
CategoryNetwork Router
LanguageEnglish

Related product manuals