Cisco CVR100W - Front Panel Lights

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 3
Front Panel Lights
LAN
(1-4)
The numbered lights correspond to the LAN ports on the
back panel of the CVR100W.
• Solid blue when the CVR100W is connected to a device
through the corresponding LAN port (1, 2, 3, or 4).
• Flashes blue when the CVR100W is sending or receiving
data over the LAN port.
• Off when the LAN port has no connection.
WPS
• Solid blue when the WPS connection is configured.
• Flashes blue when the WPS connection is in progress or
the WPS process is experiencing problems.
• Off when the WPS process finishes or there is no WPS
connection.
WLAN
• Solid blue when the wireless module is enabled with
100% Wi-Fi power.
• Solid amber when the wireless module is enabled with
50% Wi-Fi power.
• Flashes blue when the CVR100W is sending or receiving
data on the wireless module.
• Off when the wireless module is disabled.
WAN
• Solid blue when the CVR100W is connected to the
Internet through your cable or DSL modem.
• Flashes blue when the CVR100W is sending or receiving
data through the WAN port.
• Off when the WAN port has no connection.
POWER
• Solid blue when the CVR100W is powered on and is
operating normally.
• Flashes blue when the system is booting or is upgrading
the firmware.
• Off when the CVR100W is powered off.