To Next PageTo Next Page
Need help?Do you have a question about the Cisco CW9164I-ROW and is the answer not in the manual?
General| Model | CW9164I-ROW |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz, 6 GHz |
| Antenna Type | Internal |
| Power over Ethernet | Yes (802.3at) |
| Mounting Options | Ceiling, Wall |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Wi-Fi Standard | Wi-Fi 6E |
| Ports | 1 x 1G Ethernet |
| MIMO | 4x4 |
| Humidity | 5% to 95% (non-condensing) |
| Wi-Fi Certification | Wi-Fi CERTIFIED 6 |
Details the hardware capabilities, radios, external interfaces, and supported features of the CW9164I AP.
Details optional steps to configure the AP before final deployment for optimal initial operation.
Outlines essential checks and guidelines to perform before mounting and deploying the access point.
Describes various locations and methods for physically mounting the Cisco Catalyst Wireless 9164I Access Point.
Explains the methods and requirements for powering the access point, including PoE and DC power options.
Addresses common problems that prevent an access point from successfully joining a Cisco wireless controller.
