90 4028315 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Setup Wireless Access Control Page
The following illustration is an example of the Setup Wireless - Access Control page.
Setup Wireless - Access Control Page Description
This section describes the section headings and field descriptions of the Setup
Wireless - Access Control page.
Field Name Description
Access restriction When encryption is enabled, this selection allows
you to choose one of the following options from the
drop-down list:
Disable (factory default)–No access restrictions
based on MAC address of wireless access
devices
Allow–Allows wireless access to only the MAC
addresses listed in the Access List
Deny–Denies wireless access to only the MAC
address listed in the Access List
Closed Network Allows you to disable or enable the network to
access by wireless clients. When ON is selected, the
access point does not broadcast the SSID. The client
device must be configured manually with the SSID
and the MAC address of the access point in order to
access with wireless network.
Access List Displays the MAC address of the clients that are
subject to wireless access control
To Next Page
Loading...
Need help?
General