Cisco DVR - Adding a DVR Package to DNCS

Adding a DVR Package to the DNCS
4011411 Rev B 3
Adding a DVR Package to the DNCS
1 Do you want to offer the DVR service only to subscribers who are authorized for
the DVR package?
 If yes, go to step 2.
 If no, go to Adding a DVR Service to the SAM (on page 5).
2 On the DNCS Administrative Console, click the DNCS tab and then select the
System Provisioning tab.
3 Click Package. The Package List window opens.
4 Does a DVR package appear in the Package List window?
 If yes, a DVR package has already been added to the DNCS. Go to step 8.
 If no, you need to add a DVR package to the DNCS.
5 On the File menu, select New. The Set Up Package window opens.