Adding the DVR Service to Channel Maps
Adding the DVR Service to Channel Maps
This section describes how to add the DVR service to channel maps so that
subscribers who are authorized for DVR service can access the service.
After you have registered the DVR service with the SAM, follow these instructions
to add the DVR service to appropriate channel maps.
Notes:
After DVR service has been added to channel maps, DVRs display a generic DVR
service screen whenever subscribers tune to the DVR channel. However, you can
customize DVR service so that DVRs display the Recorded List whenever
subscribers tune to the DVR channel. For more information, go to Customizing
DVR Services (on page 11).
Non-DVRs without the DVR package display a Not Authorized barker whenever
subscribers tune to the DVR channel. Non-DVRs with the DVR package display a
black screen when subscribers tune to the DVR channel.
1 On the DNCS Administrative Console, click the Application Interface Modules
tab.
2 Click Channel Maps. The Display Channel Map List window opens.
3 Click once on the row that contains the channel map to which you want to add
this service.
To Next Page
Loading...
Need help?
General
