RingCentral certified router Linksys E1200 | Port Method
1. Log in to the router. The default IP address is 192.168.1.1.
The default username is “admin”. The default password is “admin”.
2. Click on “Applications & Gaming” tab.
3. Click on “QoS”.
4. Select the radial button “Enabled” next to the field labeled
“Internet Access Priority”.
5. In the field labeled “Upstream Bandwidth”, select “Manual” from
the drop-down menu and enter your current upload speed. (If unsure
of your current upload speed, please run a speed test at http://www.
ringcentral.com/support/capacity.html.)
Configuring QoS on the Linksys E1200
to Prioritize VoIP Traffic (Port Method)
4
2
3
5
1
To Next Page
Loading...
