Need help?Do you have a question about the Cisco E1200 and is the answer not in the manual?
General| Model | E1200 |
|---|---|
| Category | Network Router |
| Wireless Standard | 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 300 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Ports | 1 x 10/100 Mbps |
| Antenna Type | Internal |
| Security Features | WEP, WPA, WPA2 |
Access the router by logging in with default credentials.
Select the 'Applications & Gaming' tab.
Click on the 'QoS' option within the interface.
Enable 'Internet Access Priority' for traffic management.
Set 'Upstream Bandwidth' to 'Manual' and input upload speed.
Choose 'MAC Address' from the Category drop-down.
Assign a unique name for the IP device.
Input the specific MAC address for the device.
Set the priority level to 'High' for the device.
Click 'Apply' to save the current MAC address settings.
Click 'Save Settings' to finalize all MAC configurations.
Reboot the router to apply saved MAC configuration changes.
Access the router by logging in with default credentials.
Select the 'Applications & Gaming' tab.
Click on the 'QoS' option within the interface.
Enable 'Internet Access Priority' for traffic management.
Set 'Upstream Bandwidth' to 'Manual' and input upload speed.
Choose 'Applications' from the Category drop-down.
Select 'Add a New Application' to define QoS rules.
Enter specific VoIP port ranges (e.g., 5060-5090) for QoS.
Set the priority level to 'High' for the configured port ranges.
Click 'Apply' to save the current port configuration.
Click 'Save Settings' to finalize all port configurations.
Reboot the router to apply saved port configuration changes.
To Next Page
