28 4028315 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Accessing the Residential Gateway
You must access the WebWizard in order to configure the residential gateway. To
gain access to the WebWizard, use the web browser on the PC attached to the
gateway and complete the following steps.
1 Open the web browser on your PC.
2 Type the following IP address and then select Go:
http://192.168.0.1.
3 The web browser accesses the WebWizard and displays the default About Your
Modem page. This page displays information about your cable modem along
with a series of tabs for accessing other WebWizard configuration and operation
features.
About Your Modem Page Description
The following table provides a description of each field within the About Your
Modem page.
Field Name Description
Name The name of the residential gateway
Modem Serial Number A unique sequential series of alphanumeric
characters provided to every modem during
manufacturing
Cable Modem MAC
Address
A unique alphanumeric address for the cable
modem coaxial interface, which is used to connect
to the cable modem termination system (CMTS) at
the headend. A media access control (MAC)
address is a hardware address that uniquely
identifies each node of a network
Hardware Version Identifies the revision of the circuit board design
Receive Power Level The input level of the downstream CMTS carrier
Transmit Power Level Indicates the upstream power level
To Next Page
Loading...
Need help?
General