78 4028315 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Setup Wireless - Basic Page
The following illustration is an example of the Setup Wireless - Basic page showing
the factory default settings.
Setup Wireless - Basic Page Description
This section describes the section headings and fields descriptions of the Setup
Wireless - Basic page.
Note: If you make changes in the Setup Wireless - Basic page, click Apply to apply
and save your wireless basic settings.
Field Name Description
Access Point Allows you to turn the access point on the gateway on or
off
Service Set Identifier
(SSID)
The name assigned to this access point
Note: The factory default for the SSID field should
contain the last 6 digits of the cable modem’s MAC
address as found on the label.
Basic Service Set
Identifier (BSSID)
The MAC address of the access point
Network Type Allows you to select Open or Closed for your network
type
Country Allows you to select the country in which you are using
your access point
To Next Page
Loading...
