Cisco ISR 4000 Family Routers Administrator Guidance
Page 51 of 66
Additional
Audit Record
Contents
The old and
new values for
the time.
Origin of the
attempt (e.g.,
IP address).
Local Clock Update: CLOCKUPDATE:
System clock has been updated from
06:11:37 EDT Mon Dec 20 2010 to
06:10:00 EDT Tue Dec 20 2011,
configured from console by user on
console.
One audit record for NTP changing the
time:
Jun 20 09:52:39.622: NTP
Core(NOTICE): Clock is synchronized.
*Jul 7 18:43:14.595: %MKA-3-
MKPDU_VALIDATE_FAILURE:
(Gi0/0/1 : 11) Validation of a MKPDU
failed for RxSCI 6412.25a1.a409/0009,
AuditSessionID , CKN
12340000000000000000000000000000
00000000000000000000000000000000
Initiation of
update. result of
the update attempt
(success or
failure)
No additional
information.
Use of the “upgrade” command.
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD:
User:cisco logged command:upgrade
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD:
User:cisco logged command:copy tftp
….
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD:
User:cisco logged command:reload
Indication that
TSF self-test was
completed.
Any additional
information
generated by
the tests
beyond
“success” or
“failure”.
Jan 23 2013 06:53:24.570: %CRYPTO-
6-SELF_TEST_RESULT: Self test info:
(Self test activated by user: admin)
Jan 23 2013 06:53:24.670: %CRYPTO-
6-SELF_TEST_RESULT: Self test info:
(Software checksum ...
passed)
Reason for
failure
(including
identifier of
Cause: c3m_set_fips_mode, Fatal Fault,
FIPS POST Failure requested by: Process