To Next PageTo Next Page
Need help?Do you have a question about the Cisco 4331 ISR and is the answer not in the manual?
General| Form Factor | Rack-mountable |
|---|---|
| Maximum Throughput | 100 Mbps |
| Total onboard GE ports | 4 |
| Rack height | 1RU |
| Operating System | Cisco IOS XE |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 149°F (-20 to 65°C) |
| LAN Ports | 2 x GE |
| Memory | 4 GB |
| Flash Memory | 4 GB |
| Relative Humidity | 5 to 95% (noncondensing) |
| WAN Ports | 2 x GE WAN |
Describes Cisco 4000 Series Integrated Services Routers (ISRs), their applications, and models.
Provides important safety instructions and warnings for working with the equipment.
Follows general safety guidelines for installing, configuring, and maintaining the router.
Covers router installation methods like desktop, wall, or rack mounting.
Details procedures for connecting the router chassis to a reliable earth ground.
Explains how to connect AC power to the router and related safety precautions.
Guides on establishing console connections via RJ-45 or USB ports for router configuration.
Details initial router configuration using setup facility or Cisco IOS XE CLI.
Guides on accessing the CLI for manual initial router configuration.
Explains setting enable passwords for enhanced security and privileged EXEC access.
Describes how to verify network connectivity for the router using ping and telnet commands.
Describes how to enter ROM Monitor mode and check ROMmon version.
Provides critical safety warnings before installing or replacing any module.
Guides on installing and removing Network Interface Modules and Service Modules.
Explains how to remove and replace AC and DC power supplies and PoE converter units.
