-xii
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter
Organization
This guide includes the following chapters and appendix:
Chapter/Append
ix Title Description
Chapter 1 Overview of Cisco 4000 Series ISRs Describes the router chassis views,
information for locating the serial number,
PID
1
, and UDI
2
.
Also includes general hardware features,
slot, port and interface information, and
LED indicators.
Chapter 2 Cisco 4000 Series ISRs
Preinstallation
Describes site requirements and the
equipment needed to install the router.
Chapter 3 Install and Connect Cisco 4000
Series ISRs
Describes how to install and connect the
router to LAN, WAN, and Voice networks.
Chapter 4 Configure Initial Router Settings on
Cisco 4000 Series ISRs
Describes how to power up the router and
perform the initial configuration.
Chapter 5 ROM Monitor Overview and Basic
Procedures
Provides an overview of ROM Monitor
concepts and operations.
Chapter 6 Install and Upgrade Internal Modules
and FRUs
Describes how to install and upgrade
internal modules and field replaceable
units
3
on the router.
Appendix A Online Insertion and Removal and
Hot-Swapping
Describes how to remove and replace data
and modules using the online insertion and
removal
4
procedure.
1. PID = Product ID
2. UDI = Universal Device Identifier
3. FRU = Field Replaceable Unit
4. OIR = Online Insertion and Removal
To Next Page
Loading...
