16
Setting Up: Basics
Linksys EA-Series
How to access parental controls
The first time you try to access parental controls, you are asked to set a password.
To access parental controls for the first time:
1.
Run Cisco Connect, then click Change under Parental controls. The
Parental controls password screen opens.
2.
Enter a password (from 4 to 32 characters), then enter a secret question
and answer.
• The password must contain from 4 to 32 valid characters, which are
A-Z, a-z, and 0-9.
• The answer to the secret question should be something not easily
guessed by others. If you forget your password, you can reset it by
correctly answering your secret question.
3.
To save your settings, click OK. The Parental controls main screen appears.
To access parental controls after the first time:
1.
Run Cisco Connect, then click Change under Parental controls. The
Enter the parental controls password screen opens.
2.
Enter the parental control password, then click OK.
NOTE
If you forgot the password, click I forgot my password and enter
the answer to your secret question.
The Parental controls main screen appears.
To change the parental controls password:
1.
In the Parental controls main screen, click Change parental controls
password, then follow the on-screen instructions.
To Next Page
Loading...
Need help?
General
