Cisco Linksys WAP300N - Understanding Operating Modes; Access Point Mode

4
Setting Up: Basics
Linksys WAP300N
Access Point Mode
Adds wireless networking to an existing wired (Ethernet) network or upgrades an existing
wireless network. For instructions about using this mode, see “How to use Access Point
mode” on page 9.
• If you have a wired network, this mode adds the ability to connect wireless devices
(such as notebook computers, tablets, and smartphones) to the network.
• If you have an older wireless network, this mode adds Wireless-N (802.11n)
networking support.
• If you have a Wireless-N (802.11n) 2.4 GHz-only network, this mode adds support for
the 5 GHz band.
Operating modes
Internet Modem Router
Notebook
Computer
Tablet
Smartphone
WAP300N